Auto Shut Off - Heinner HKS-5IXBK Instruction Manual

www.heinner.com
ZERO OR "TARE" FUNCTION
To weigh different loads consecutively without removing loads from the scale. Put first
Load on the scale, get weight reading. Pres button to reset the LCD reading to "0" before
adding next load. You can repeat this operation.
Condition 1: "ZERO" function – when total sum of all loads on scale ≤4 of scale's max
weight capacity. (4% = 80g when capacity is 2000g; 200g when capacity is 5000g)

AUTO SHUT OFF

Auto shut-off occurs if display shows "0" or shows the same weight reading for 2 minutes.
Condition 2: "TARE" function – when total sum of all
loads on scale > 4% of scale's max weight capacity (4%
= 80g when capacity is 2000g; 200g when capacity is
5000g).
Under this condition: By pressing
total weight of all loads on the scale. If you want to
weight more loads, just press
reading to "0" again.
5kg, 2 x AAA
, you can see the
to reset LCD