Veria 8276B User Manual page 19

10
Device configuration.
11
The name of the
device.
Room address.
Call center.
The address of the
Centre.
Floor.
List of monitoring
devices.
List of private entry
stations.
Add a monitoring
device.
Delete the monitoring
device.
List of entry stations.
Edit the monitor name.
Room address settings (one apartment/family
address must be the same).
If enabled, you can set the address of the
center.
You can set up any internal monitor as the
control center.
View a list of monitoring devices.
View a list of private entry stations.
View
Edit: You must enter the correct password to
enter the input station settings.
Cancel
Button address: to set the target address of
button calls to the input station.
Private device: If enabled, you can only call or
be monitored by this family.
Run: Appears only after enabling "Private
Device". If enabled, a private entry station can
call this family.
Monitor: If enabled, internal monitors can
monitor this vst. Unit.
Edit: to enter settings vst. the correct password.
Monitor unlock: If enabled, you can open the
door or gateway with the Unlock button in a
monitoring state.
Unlock time: optionally 0.8-30 seconds.
Door lock status: set the unlock time of the lock
and the type of signal for unlocking.