Storage Information; Alarm Function; Dvr Function; System Settings - Veria 8276B User Manual

Table of Contents

Advertisement

and hold the selected file to display an icon and confirm that you will delete the file.
Note: To delete all photos/video recordings/audio
files press the settings icon on the main menu select delete menu
and select delete all content from internal memory or Delete all content from external memory.

13. Storage information:

Press the "Storage" icon in the main menu to see detailed storage information for external and internal
memory.

14. Alarm function:

Press the "Settings" icon in the main menu and go to the "Alarm Clock"
menu. You can adjust the alarm
volume and 6 alarm types as needed by the user.
When the alarm goes off, press the red alarm icon to turn it off, if you do not turn it off, it will start
fivein 1 minute and then automatically shuts down.

15. DVR Function:

Press the settings icon in the main menu and go to the DVR settings menu. You can set the time for a
screen saver and 3 time windows. Choose one time window, enable it, set start time, end time, and
recording source. The DVR will start recording automatically as soon as it reaches the time of turning on
the recording.
Note:
(1) The DVR only records video recording without sound.
(2) A minimum 2G SD card is required to support DVR function, 16 GB recommended
or 32 GB SD card
(3) If motion is detected, it is recorded at normal speed (approx. 25 to 30f/s)
if no movement is detected, it is recorded at ahigherspeed (and 3f/s).
(4) If you set the start time and end time the same, the DVR function will work continuously.
16. Internal memory backup:
To back up all uploaded files from internal memory to SD
tab, press the Settings icon on the main menu, select Backup
internal memory, an icon will appear on the screen and it will be confirmed by a memory backup.
17. Set the ringtone:
Users can choose preset ringtones on the monitor or set
your own mp3 files as ringtones.
Procedure:
Create the "eRingTone" folder on the micro SD card and copy the mp3 files to the folder.
Insert the micro SD card into the monitor, press the "Settings" icon in the main menu
select the "Ringtone Sound" menu, then select the ringtone to open the door or
inthe intercom's yzving tone and choose the desired mp3 file.

18. System settings:

Set system time
Press the settings icon in the main menu and select System Time".
Time format : Day Month Year / Hours/Minutes/Seconds, after setting, press n
upper left corner
asset in the
of the screen to confirm and save.

Advertisement

Table of Contents
loading

Table of Contents