Download Print this page

Helios 0003-D Quick Start Manual

Advertisement

Quick Links

TSB: 0003-D
TECHNICAL SERVICE BULLETIN
HELIOS
PURPOSE FOR TSB
Quick start guide for the new Helios Solar Shade System
OUT OF BOX
Instruction
MANUAL
Motor
Located in the Helios box
BOX
Mount Bracket
Hardware
EXPOSED
Mount Bracket
Hardware
SOLAR STATION
Instruction
Manual
Located in the Helios box
REMOTE
Remote
Instruction
Manual
Located in the remote box
1250 | FEB 2021 | TSB 0003-D QUICK START GUIDE
DATE
3/15/2021
TSB TYPE
Quick Start Guide
SHADE TYPES
INSTRUCTIONS
Mount the brackets.
1
a
Box Mount Brackets
It is recommend to start at 7
Position solar station up for optimal sun exposure.
Snap the solar station into
brackets.
Align solar station with the
right edge of the box and
snap into position.
Make any small necessary
adjustments to alignment
after solar station has been
snapped into place.
DESCRIPTION
Helios Quick Start Guide
All Exterior Shades
hole from the top.
th
Exposed Mount Bracket
b
Use included hardware to mount on different surfaces
such as:
Under an Eave
SHADE
Roof
SHADE
Connect the panel cable to the motor cable.
2
Solar Station Cable
Motor Cable
It is recommended to hand-tighten water tight cap.
TSB Number
0003-D
PAGE
Range of Motion
Side Post or Wall Mount
SHADE
UNDER OVERHANG
SHADE
Solar Station and
Motor Cable
Water Tight Cap
MARCH 2021
1 OF 2

Advertisement

loading

Summary of Contents for Helios 0003-D

  • Page 1 Instruction Make any small necessary Manual adjustments to alignment It is recommended to hand-tighten water tight cap. after solar station has been snapped into place. Located in the remote box 1250 | FEB 2021 | TSB 0003-D QUICK START GUIDE...
  • Page 2 Remote is now paired to solar station Directions have now been switched. Motor Limits ALTERNATE TO THE BLACK TOOL: 4mm Allen wrench – black tool is included in Helios Box. Lower Settings Insert the Black limit tool supplied into the hole with the arrow point up (red).