Lubricant And Sealer Specifications - IC Bus CE Series Operation And Maintenance Manual

Lubricant and Sealer Specifications

Component Component Vendor / Lubrication Type
Front axle wheel bearing Eaton
oil
Eaton
gear lube of API GL-5 quality meeting
MIL-PRF-2105E specs including *synthetic
lubricants.
*: Do Not Mix conventional lube with
Synthetic lube.
Lubricant and Sealer Specifications
Non-driving Front Axle
® / Dana ® axle (Generic)
® ®
/ Dana axle: multipurpose EP
Viscosity / Ambient Temperature / Notes
75W: -40°F to - 15°F (-40°C to -26°C)
75W-80: -40°F to 80°F (-40°C to 27°C)
75W-90: -40°F to 100°F (-40°C to 38°C )
75W-140: -40°F and above (-40°C and above )
80W-90: (-26°C to 38°C) -15°F to 100°F
80W-140: -15°F and above (-26°C and above)
85W-140: 10°F and above (-12°C and above)
75W: -40°F to 32°F (-40°C to 0°C)
75W-90: -40°F to 100°F (-40°C to 38°C)
75W-140: -40°C and above (-40°F and above)
80W: -15°F to 70°F (-26°C to 21°C)
80W-140: -15°F and above (-26°C and above)
90W: 10°F to 100°F (-12°C to 38°C)
85W-40: 10°F and above (-12°C and above)
140W: 40°F and above (4°C and above)
Maintenance
203