Hazard Warning Switch
To prevent property damage, personal injury,
and / or death in the event engine shut down
occurs, make certain the vehicle is safely off
the roadway, the hazard flashers are on and the
warning devices are properly placed.
1.
Hazard warning light switch
1. Use the hazard warning light switch in an emergency to
warn traffic of vehicle breakdown, approaching danger,
the vehicle is in tow, or is operating at a reduced speed.
SECTION 10 — ROADSIDE EMERGENCIES
WARNING
2. Press the button to activate all hazard flashers
simultaneously.
3. Press the button again to turn off the flashers.
Emergency Equipment (Recommended
On-Board)
Fire Extinguisher
Inspect the fire extinguisher monthly to make sure it has a
sufficient charge. Look at the gauge located at the top of the
extinguisher to verify proper charge.
Roadside Emergencies
133