Special Maintentance; Condenser Cleaning - Electrolux GT1 Push Operator's Manual

10. SPECIAL MAINTENTANCE

Before proceeding with any maintenance
operation, it is compulsory to switch off the
machine and unplug it from the mains.

Condenser cleaning

In order to guarantee good cooling system
performance, the
cleaned every month.
How to reach it:
- Switch off the power supply and disconnect
the power cable;
-GT1 machine: remove the rear panel by
unscrewing the two bolts fastening it (fig.28);
-GT2 machine: remove the left side panel by
unscrewing the two bolts fastening it (fig.29);
- Using a dust exhauster, remove the dust that
has collected between
(fig.30).
IMPORTANT
Never use a screwdriver or sharp object to
clean between fins
Data di emissione: Febbraio, 2019
Caution
condenser must
the condenser
be well
fins
Revisione: 6
Fig. 28
Fig. 29
Fig. 30
Pag. : 18/28