Agilent Technologies PSG Series Installation Note page 13

Signal generators e8267c upgrade kit for option 602 (digital bus baseband generator with 64 msample memory)

Hide thumbs Also See for PSG Series:

Install the Digital Bus Cable

1. Refer to

Figure

5. Connect the loose end of W90 to A17P1 on the A17 Baseband Generator Interface

Board.

Make sure the angled side of the cable connector on W90 is facing up.

CAUTION

Failure to do so could result in damage to the A17 Rear Panel Interface Board connector.

Figure 5

A14 Digital Bus Baseband Generator Board

W90

A17P1

E8267ck-602