EDAN F3 Quick Reference Card

NOTE:
1 Make sure you have confirmed the fetal life by other means
before using this monitor for FHR monitoring, and always
confirm that the fetus is the signal source in the monitoring
process.
2 Set date and time information in advance. Do not change
date or time during monitoring.

Switching On

1 Connect the monitor to AC power supply using the power cord.
2 Press the power switch

Basic Operation

1 Keys: Press the keys on the front panel directly.
2 Control Knob: Rotate the knob clockwise or anticlockwise to move
the cursor on the screen, and press the knob to confirm selection.
Setting Time
1 Select the setup key
2 Select Date And Time.
3 Set the year, month, date, hour, minute and second from left to right.
4 Select a date format.
5 Select OK.
6 Restart the monitor.
Fetal Monitor Quick Reference Card
.
.
1 / 8