Configuration - Riello MultiCOM 392 User Manual

C
ONFIGURATION
MultiCOM 392 can be configured using the configuration software of the MPW.
By default no function is associated to input/output and they have to be configured via the UPS configuration software.
Before setting the input/output, you must select "Multicom 392 [8out/4in]" for I/O card model.
For each input can be selected: the associated function (Input mode).
INPUT
IN 1
IN 2
IN 3
SWMB
- MPW / MPX -
INPUT CONTACTS DEFAULT CONFIGURATION
CONFIGURABLE
YES
YES
YES
YES
Configurator
Input 1 mode NO OPERATION
Input 2 mode NO OPERATION
Input 3 mode NO OPERATION
Input 4 mode NO OPERATION
32
Mode