Disposal Of Packing And Of The Appliance; Packing; Appliance - Modular EM E6/11-D Installation - Use - Maintenance

In the event of an appliance fault or malfunction, shut the gas shut-off valve and/or switch the
appliance off at the main switch installed upline.
Installation and conversion to a different type of gas must be carried out by qualified technicians
authorized by the manufacturer, in compliance with current safety standards and the instructions in
this manual.
Appliance maintenance and conversion to a different type of gas must be carried out by qualified
technicians authorized by the manufacturer, in compliance with current safety standards and the
instructions in this manual.
WHEN IN USE, THE OVEN SURFACES ARE HOT. TAKE CARE!
WHEN THE DOOR IS OPENED, HOT STEAM MAY ESCAPE.
IF THE POWER CORD IS DAMAGED IT MUST BE REPLACED BY THE MANUFACTURER OR
A QUALIFIED SERVICE CENTRE, OR IN ANY CASE A PERSON WITH SIMILAR
QUALIFICATIONS, SO AS TO PREVENT ALL TYPES OF RISK.
IN THE CASE OF AN OPERATING FAULT OR MALFUNCTION, IMMEDIATELY TURN THE
OVEN OFF!
THE FLOOR SURROUNDING THE APPLIANCE MAY BE SLIPPERY !
ATTENTION ! TO PREVENT BURNS, DO NOT USE CONTAINERS FILLED WITH LIQUIDS OR
FOODS THAT TURN INTO A LIQUID STATE WHEN COOKED, AT LEVELS HIGHER THAN
THOSE THAT CAN BE MONITORED.
Clean the appliance following the instructions given in Chapter " INSTRUCTIONS FOR CLEANING".

1. DISPOSAL OF PACKING AND OF THE APPLIANCE

PACKING

The packing is made using environmentally friendly materials. The plastic recyclable components are:
the transparent cover, the bags containing the instructions manual and nozzles (made of Polyethylene -
-
PE).
- the straps (in Polypropylene - PP).

APPLIANCE

The appliance is manufactured 90% from recyclable metals (stainless steel, aluminium sheet, copper... ).
The appliance must be scrapped in compliance with current regulations governing such disposal.
Make the appliance unusable before scrapping.
It must be disposed of properly.
THE SYMBOL SHOWING A CROSSED-OUT WASTE CONTAINER ON THE UNIT OR PACKAGE
INDICATES THAT, AT THE END OF ITS LIFE CYCLE, THE PRODUCT MUST BE COLLECTED
SEPARATE FROM OTHER WASTE.
19