Advertisement
Figure 6. Multiple device location using Auxiliary Keypad, with neutral connection (recommended)
Figure 7. Multiple device location with Auxiliary Keypad, without neutral connection
IMPORTANT!
When used in conjunction with an Auxiliary Keypad (C4-KA-xx), the wire
connecting the Auxiliary Keypad to the dimmer must not exceed 45 m (150 ft.) at 120V AC, and
30 m (100 ft.) at 277V AC.
Figure 8. Multiple device location using Configurable Keypad, neutral required
Copyright ©2021, Wirepath Home Systems, LLC. All rights reserved. Control4 and SnapAV and their respective logos are registered trademarks or trademarks of Wirepath Home Systems, LLC, dba
"Control4" and/or dba "SnapAV" in the United States and/or other countries. 4Store, 4Sight, Control4 My Home, Snap AV, Araknis Networks, BakPak, Binary, Dragonfly, Episode, Luma, Mockupancy,
Nearus, NEEO, Optiview, OvrC, Pakedge, Sense, Strong, Strong Evolve, Strong Versabox, SunBriteDS, SunBriteTV, Triad, Truvision, Visualint, WattBox, Wirepath, and Wirepath ONE are also registered
trademarks or trademarks of Wirepath Home Systems, LLC. Other names and brands may be claimed as the property of their respective owners. All specifications subject to change without notice.
Maximum length:
120V AC 45 m (150 ft.)
277V AC 30 m (100 ft.)
Maximum length:
120V AC 45 m (150 ft.)
277V AC 30 m (100 ft.)
Auxiliary Keypad
200-00308-J 20210520MS
Advertisement
