Download Print this page

solamagic IR00035 Series Installation And Operating Instructions Manual

Heat-advertising-combination

Advertisement

Quick Links

Installation and Operating Instructions
for Product Group IR00035
Heat-Advertising-Combination
IMPORTANT INSTRUCTIONS!
When using electrical appliances, basic precautionary measures must always be taken in order to reduce the
risk of fire, electric shock and injury to persons, including the following:
1.
Read all instructions before installing and using the heating appliance.
2.
The appliance must be connected by a qualified electrician (see circuit diagram, page 9)
3.
Great care should be taken if the appliance is used by or near children or invalids. This appliance is not
intended for use by individuals (including children) with limited physical, sensory or mental capabilities
or those lacking in experience and/or instruction unless they are supervised by a person responsible for
their safety or have received instructions from such person on how to use the appliance. Children
should be supervised to ensure that they do not play with the appliance!
4.
This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Keep combus-
tible materials, such as furniture, pillows, bedding, papers, clothes, etc. and curtains at least 3 feet (0.9
m) from the front of the heater and keep them away from the sides and rear of the heater (sides and
rear restrictions apply to location dedicated heaters only.)
5.
This heater is not equipped with a device to control the room temperature.
6.
Always disconnect the heater from the power supply when not in use.
7.
Avoid the use of an extension cord as this may overheat and cause a risk of fire.
8.
Never leave the appliance unsupervised when in operation. Do not use the heating appliance with a
program selector, timer or other control device which switches the appliance on automatically!
9.
It is not permitted to use the appliance in small rooms in which people live who are not able to leave the
room themselves without external help, unless permanent supervision is guaranteed.
10. Heating appliances which are to mounted in a bathroom should be installed in a manner which excludes
the switch from being within touching distance of a person who is either in the bath or under the show-
er.
11. Do not look directly over a longer period of time or from a short distance into the „infrared lamp" when
in operation. This may cause damage to the eyes.
SOLAMAGIC GmbH
Am Waldstadion 4
D-07937 Zeulenroda-Triebes
www.solamagic.com
e-mail: info@solamagic.com
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the IR00035 Series and is the answer not in the manual?

Questions and answers

Summary of Contents for solamagic IR00035 Series

  • Page 1 11. Do not look directly over a longer period of time or from a short distance into the „infrared lamp“ when in operation. This may cause damage to the eyes. SOLAMAGIC GmbH www.solamagic.com Am Waldstadion 4 e-mail: info@solamagic.com...
  • Page 2 12. This appliance is approved for indoor and outdoor areas. The infrared heater is tested and approved for horizontal wall installation or ceiling installation only. 13. Attention! Please take care that the radiation emission opening is not facing upwards allowing water and dirt to collect in the appliance.
  • Page 3 OPERATING INSTRUCTIONS Installation Overview Technical Data: 115V, 60Hz, – 2 x 1500W + 2 x 36 W fluorescent lamp Lifetime of infrared lamps of heater ca. 5000 hrs. 120V, 60Hz, – 2 x 1633W + 2 x 36 W fluorescent lamp Individually switchable, if installed accordingly.
  • Page 4 Only a horizontal assembly is al- • Mounting on wall: lowed for the heat-advertising- combination. Do not fit the heater near normally • flammable parts. It is absolutely es- sential to adhere to the safety min- imal clearances! The mounting height, measured •...
  • Page 5 Installation notes/Safety guidelines Never operate the equipment without supervision. Do not use the heater with a program selection • switch, a timer or another control unit that switches the equipment on automatically. Electrical installations and repairs are to be carried out only by qualified electricians. •...
  • Page 6 Installation Wall/Ceiling/Awning detail A detail B Mounting of heat-light-combination with brackets on solid, stable, normally flammable under surface. • Consider the mounting material according to the under surface. • Mounting material is not delivered, as different under surfaces require different types of mounting ma- •...
  • Page 7 Connection: Connection diagram Operation (ON/OFF) of the heat- Heat-Advertising-Combination • er and/or the light via switches 2 x 1500 W including fluorescent light 2 x 36 W to be installed on site. One switch for each electric cir- • cuit. Wiring diagram Choice of switches and their Circuit #1...
  • Page 8: Maintenance Instructions

    • The capacity of the heater is not strong enough. Please compare the area to be heated as stated in the technical data as well as the following table of efficiency. Installation Solamagic 3000W Installation height in mm 2500...
  • Page 9 Changing a defective illuminant Type – fluorescent lamp: PL-L 36W/84/4P 9.1. Carefully remove advertising panel. 9.2 Pull out the fluorescent lamp and replace with a new one Finally reassemble the spotlight in reverse order Changing the infrared lamp Any necessary infrared lamp replacements are to be carried out by a qualified electrician. The heat-light- combination should be dismantled by a qualified electrician and sent it back to the specialized dealer for replacement of the infrared lamp.