Advertisement
Available languages
Available languages
EN
User Manual
Operating manual
Please read the following operational information thoroughly before using the soldering iron.
Soldering ignition and extinguishing
1. Connect the gas soldering head to the suitable gas tank.
2. Make sure the exhaust vent is facing upward.
3. Switch the safety button to „OPEN" and rotate the flame adjust leveler to "+". Press the
ignition button. This action will ignite the soldering iron. When safety button is on „LOCK"
mode, then the ignition button can not be pressed.
4. Turn the adjusment lever to „-", this will cut off the gas supply and extinguish the flame.
Flame adjustment
Move the adjusment lever toward „+" to increase or „-„ to decrease the temperature and the
flame strenght.
Warning
1. Keep teh soldering out of reach of children
2. Ignite the soldering away from face, hand, clothing, or combustible materials.
3. Contains flammable gas under pressure. Never expose the soldering iron to heat above 40°C
or 104°F or to prolonged sunlight.
4. Do not disassemble the unit on your own.
5. Never puncture or put in fire
6. work in a fireproof and well ventilated area
7.Never operate the soldering in a closed container holding combustible vapors, flammable
liquids or explosive materials.
Advertisement
