Replacement manuals are available upon request at no charge at www.greenlee.com. All specifications are nominal and may change as design improvements occur. Greenlee Tools, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. KEEP THIS MANUAL Greenlee Tools, Inc.
PVC Shoes for Use with 880/884 Benders IMPORTANT SAFETY INFORMATION SAFETY ALERT Pinch points: Keep hands away from bending shoe, SYMBOL pipe supports, and conduit when bender is in use. Failure to observe this warning could This symbol is used to call your attention to hazards result in severe injury or death.
PVC Shoes for Use with 880/884 Benders Shoes and Supports to Bend 40 Mil PVC-Coated Rigid Conduit Use these accessories with your 880 or 884 bender. 40 Mil UPC No. Centerline Included in Included in Description 33612 Coated Size 78-3310-...
PVC Shoes for Use with 880/884 Benders How to Bend Cam retracted (for bending conduit) Step 3 Rotate the conduit support so that the appropriate groove is toward the conduit. Note: For bending more than 75° in 1" PVC-coated Cam extended (for ejecting conduit) conduit, rotate the conduit support so that the large groove faces the conduit.
Page 6
PVC Shoes for Use with 880/884 Benders How to Bend (cont’d) This side—turn counterclockwise to remove conduit. This side—turn clockwise to remove conduit. Step 5 Step 7 Advance the shoe by operating the hydraulic pump. Release the pressure at hydraulic pump.
PVC Shoes for Use with 880/884 Benders Shoe Unit Illustration and Parts List (B) SHOULDER (A) SHOULDER BOLT BOLT (B) SPRING (A) SPRING (B) CAM (A) CAM SHOULDER BOLT SHOE SPRING Items marked with (•) are included in the associated service kit.