Advertisement
9.3.3 Installation
1) Jack up the vehicle, remove seat and tank
2) Unscrew OEM instrument, unplug connector, unscrew OEM instrument carrier.
3) attach the motogadget instrument to the vehicle-specifi c motogadget retaining plate and
connect the tail cable of the motogadget instrument to mo.hub
4) Connect motogadget vehicle-specifi c plug and battery cable to mo.hub
5) Screw the motogadget retaining plate with instrument to the fork bridge with the OEM screws.
6) Attach mo.hub to the upper frame tube with cable ties, avoiding collision
pay attention to mo.hub housing and tank.
7) OEM instrument connector and motogadget instrument cable kink and scuff-free
Lay to the mo.hub and secure the cables to the frame with cable ties. Suffi cient
Allow game for steering movements.
8) Insert the plug of the OEM speedometer into the vehicle with motogadget plug.
9) Install the tank and seat
10 settings for motogadget instruments
motoscope tiny and motoscope mini
Circ = 2000 / ImpW=1 / ImpE=1
motoscope classic
Circ=200 / ImpW=4 / ImpW=1
Advertisement
Need help?
Do you have a question about the mo.hub and is the answer not in the manual?