Page 1
POWER ON Green light Push button 1 for 3 secondes. Power on, in standby T2 BODYCAM START RECORDING mode, Not recording Push button 1 (2 beeps). QUICK START MANUAL STOP RECORDING Red light Push button 1 for 2 seconds. One flash a picture is (2 beeps, indicator 3 is green).
Page 2
Zepcam Connect PC software. 1. Connect Zepcam single dock A to the Offloaded videos can be viewed either Place the Zepcam T2 in the Zepcam Docking USB charger on the PC of online using Zepcam Manager. 2. Place Zepcam T2 into the single dock...