Advertisement
Quick Links
Advertisement
Related Manuals for ZEPCAM T2+ BODYCAM
Summary of Contents for ZEPCAM T2+ BODYCAM
- Page 1 T2+ BODYCAM INSTRUCTION MANUAL...
- Page 2 Thank you for buying the ZEPCAM T2+ Bodycam. We hope you will enjoy our product as much as we enjoyed creating it. Before starting please check: ● If the product or the packaging is not visibly damaged. ● Make sure all the packaging content is complete (camera, clip, cradle, usb cable, charger, Pin code sticker) ●...
- Page 3 ● Components of Zepcam T2+ ● Characteristics How to use ● Functionalities ● Colour signals Charging Zepcam T2+ ● Via single docking station ● Via Zepcam T2 series docking station Managing T2+ data Troubleshooting More information and FAQ on: www.zepcam.com - [T2+ IM-EN-1.4]...
-
Page 4: Product Description
PRODUCT DESCRIPTION HOW TO USE AND CHARACTERISTICS The Zepcam T2+ is a bodycam for professional use to record video, audio and GPS. The T2+ camera is easy to use, ruggedized and has a large battery to record up to 11.5 hours (840x480p), 10 hours (1280x720p) or 9 hours (1920x1080p) continuously. - Page 5 Up to 11.8 hours Security Only accessible for authorized users. charging Zepcam docking station (sold Data offload Via Single Dock or Zepcam separately) Docking Station Single dock with USB charger Size User management Use Zepcam Server Software or Zepcam Cloud to manage users,...
-
Page 6: How To Use
● RECORDING PRE-RECORDING ENABLED In pre-recording mode video is buffered prior to actual recording and ● will be part of the entire recording. This can be activated using Zepcam software. RESET Press once for reset ● No data and settings will be lost if the device is in standby mode ●... - Page 7 Recording video standby mode Not recording Red light Pre-recording activated One flash - a picture is taken After powering on: solid green for 5 sec. and then 2 times red flash More information and FAQ on: www.zepcam.com - [T2+ IM-EN-1.4]...
- Page 8 Blue light Charging. Turns off when fully charged CHARGING ZEPCAM T2+ HOW TO USE AND CHARACTERISTICS The T2+ can be charged using the single docking station or T2 series docking station (available as 4 Dock and 8 Dock). Please note: ●...
- Page 9 1. Place Zepcam T2+ into the single docking station 2. Connect the Zepcam single dock to the USB charger 3. Continuous blue LED during charging on the T2+ camera 4. When the T2+ is fully charged the blue LED will turn off More information and FAQ on: www.zepcam.com...
- Page 10 T2 SERIES DOCKING STATION 4 OR 8 DOCKS Your T2+ camera can also be charged using the Zepcam T2 series Docking Station (4 or 8 docks). With the Zepcam T2 series Docking Station, you can fast charge your T2+ camera and simultaneously offload recorded data.
- Page 11 ● Offload video to Zepcam Manager ● Remotely manage T2+ camera settings ● Assign different users to bodycams [Note]: If you would like to have a Zepcam Manager account or an on premise software installation please contact us directly at support@zepcam.com...
-
Page 12: Troubleshooting
TROUBLESHOOTING HOW TO SOLVE PROBLEMS If the Zepcam T2+ behaves oddly or does not respond to button presses: ● Reset the T2+ by pressing the reset button (button 6) on the back of the T2+. On the docking station, when the LED in front of the camera is flashing green and red, check Zepcam Manager for details.
Need help?
Do you have a question about the T2+ BODYCAM and is the answer not in the manual?
Questions and answers