Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for ZEPCAM T3 LIVE Bodycam
Summary of Contents for ZEPCAM T3 LIVE Bodycam
- Page 1 T3 LIVE BODCYAM INSTRUCTION MANUAL T3 Live_IM-EN-2.0.X...
- Page 2 Do not attempt to use the device if there are missing or damaged parts • Use ZEPCAM certifi ed accessories only The information contained in this document is subject to change without notice. For questions, please consult our website at www.zepcam.com/support...
-
Page 3: Table Of Contents
LED for status notifi cation • Start/stop on-device recording • LIVE Mode Get started • How to wear the T3 Live Bodycam Charge the battery • Charge using a T3 Docking Station (Single/Multi) • Charge using the USB-C Connector • Storage Offl... -
Page 4: Product Description
Product Description The T3 Live Bodycam allows the user to record video on the bodycam as well as livestream the video via 4G/LTE mobile networks to the central ZEPCAM server. The video with GPS location and metadata can fi rst be stored on the bodycam and later offl oaded; it can also be livestreamed directly and centrally viewed immediately. -
Page 5: How To Use
The T3 Live Bodycam connects to ZEPCAM Manager to run and manage all aspects of the bodycam operation: devices, users, settings, authorisations, viewing, sharing, and managing videos as (legal) evidence and actionable data for a range of purposes. -
Page 6: Start/Stop On-Device
Start/stop on-device recording When switched on after pressing the Power on/off button (8), the T3 Live Bodycam is in standby mode. In standby mode, the user can initiate on-device recording. Note: The recordings are stored on the device and can only be offl oaded using a ZEPCAM T3 Docking station. -
Page 7: Live Mode
If LIVE mode is off, the video is not being streamed to the server and is only recording on the device. When the T3 Live Bodycam is switched on, the LIVE mode is activated by default. Note: The LIVE mode button (9) works independently from the Start/Stop button (8) -
Page 8: Get Started
Get started Before using the T3 Live Bodycam, make sure to fully charge the battery as the battery is not fully charged for storage reasons. See section Charge the battery. The T3 Live Bodycam has been initialised and confi gured to work properly with ZEPCAM Manager and needs to also be confi gured to user or organisational requirements. -
Page 9: How To Wear The T3 Live Bodycam
The T3 Live Bodycam should be listed in the Live page of ZEPCAM Manager. If it does not work, please contact our support desk: support@zepcam.com • By default, Wi-Fi is on, as indicated on the LCD display. To connect the T3 Live Bodycam to a Wi-Fi network, please consult the ZEPCAM Manager Manual •... -
Page 10: Storage
5. The battery is fully charged when the green LED stops fl ashing and the battery indicator in the LCD display is fully fi lled Note: T3 Live Bodycam will not offl oad data, nor update settings and the fi rmware via the USB-C port. Storage Make sure the battery is not completely depleted before storage. -
Page 11: Offload Recorded Bodycam Videos
Live Bodycam storage from overloading and blocking operations. Note: T3 Live Bodycam will not offl oad data, nor update settings and the fi rmware via the USB-C port. The battery of the T3 Live Bodycam is being recharged during the offl oading process. -
Page 12: T3 Minicamera
T3 Minicamera The T3 Minicamera is a small external camera for the T3 Live Bodycam. It is specifi cally developed for use on a helmet or as a more discrete camera on (light) clothing. The T3 Minicamera is controlled using the buttons of the T3 Live Bodycam. -
Page 13: How To Mount The T3 Minicamera
2. To use the sensor of the T3 Live Bodycam again, switch off the T3 Live Bodycam, disconnect the T3 Minicamera and switch the power of the T3 Live Bodycam back on 3. The LED on the T3 Minicamera shows green when the T3 Live Bodycam is in turned on and in standby mode 4.