Table of Contents
Advertisement
Parallel Port
2.8 Parallel Port
The program assumes that the base address of your parallel port is
Hexadecimal 378. If that is not the case, you can change the base address by
left clicking on the parallel port configuration button. You can access the built-in
help file by left clicking on the HELP button. The program includes the
parameter assistant, which can help you choose divider ratios and parameters
depending on your choice of VCO frequency, prescaler value, and PFD
frequency. By simply Left clicking on each of the respective buttons brings up
a window from which you can control the individual registers and all the
settings. There is also an option to set all the bits of the serial interface
manually, if so desired.
If you have any questions or encounter any difficulties, contact
yiannis@ti.com.
2-10
Advertisement
Table of Contents
