Table of Contents
Advertisement
Quick Links
This document describes how to use and configure the TDP158RSBEVM and provides recommendations
for system hardware implementation. These recommendations are only guidelines and it is the designer's
responsibility to consider all system characteristics and requirements. Refer to the TDP158 data sheet
(SLLSEX2) for technical details such as device operation, terminal description, and so forth.
......................................................................................................................
1
1.1
1.2
2
2.1
2.2
2.3
2.4
2.5
2.6
2.7
3
4
4.1
4.2
5
6
..................................................................................................................
7
1
2
3
4
5
6
7
8
9
10
11
12
2
1
2
3
4
Submit Documentation Feedback
..............................................................................................
........................................................................................
.......................................................................................................
....................................................................................................
2
...................................................................................................
.................................................................................................................
..............................................................................................
....................................................................................
............................................................................................................
............................................................................................
............................................................................................................
....................................................................................................
................................................................................................................
2
............................................................................................................
.........................................................................................
...............................................................................................................
..............................................................................................................
..............................................................................................................
..............................................................................................................
..............................................................................................................
............................................................................................................
.................................................................................................
................................................................................................
2
....................................................................................................
..................................................................................................
Copyright © 2017-2018, Texas Instruments Incorporated
SLLU257A - February 2017 - Revised February 2018
TDP158 RSB Evaluation Module
Contents
.............................................................................
............................................................................
........................................................................
List of Figures
............................................................
..............................................
...................................................................
..............................................
List of Tables
User's Guide
2
2
2
3
3
3
4
4
5
5
6
6
7
7
11
13
16
16
2
3
7
8
9
10
13
13
14
14
15
15
4
4
5
5
1
Advertisement
Table of Contents
Related Manuals for Texas Instruments TDP158RSBEVM
Summary of Contents for Texas Instruments TDP158RSBEVM
-
Page 1: Table Of Contents
SLLU257A – February 2017 – Revised February 2018 TDP158 RSB Evaluation Module This document describes how to use and configure the TDP158RSBEVM and provides recommendations for system hardware implementation. These recommendations are only guidelines and it is the designer’s responsibility to consider all system characteristics and requirements. Refer to the TDP158 data sheet (SLLSEX2) for technical details such as device operation, terminal description, and so forth. -
Page 2: Overview
PCB design and layout files can be provided upon request to provide PCB design illustrations of the routing and placement rules. Figure 1 is a picture of the EVM. Copyright © 2017, Texas Instruments Incorporated Figure 1. TDP158RSBEVM TDP158 RSB Evaluation Module SLLU257A – February 2017 – Revised February 2018 Submit Documentation Feedback Copyright ©... -
Page 3: Hardware Description
Hardware Description www.ti.com 1.2.1 What is Included in the TDP158RSBEVM? The major components of the EVM are as follows: • TDP158RSB • Standard DP source connector (receptacle) • Standard HDMI sink connector (receptacle) • DC power regulators • C programming interface for external I C host connection •... -
Page 4: Enable And Reset
(CUI Inc. PJ-202AH) has an inner diameter of 2.1 mm and an outer diameter of 5.5 mm. The tip of the 5-V power supply must be positive. A 5-V power supply of at least 1.5 A that meets the stated requirements can be used to power the TDP158RSBEVM. Power is provided to the EVM when SW1 is set to position 1. -
Page 5: Jumper Configuration
2 kΩ Pullup Differential Pair HDMI IN R1, R2, R3, R4, R5, R6, R7, R8 populated with 49.9 Ω SLLU257A – February 2017 – Revised February 2018 TDP158 RSB Evaluation Module Submit Documentation Feedback Copyright © 2017–2018, Texas Instruments Incorporated... -
Page 6: Usb Interface Via Tusb3410
4. Plug in an HDMI video sink device into J4 (Standard HDMI connector) using a standard HDMI cable. 5. Video output on HDMI sink should be observed. TDP158 RSB Evaluation Module SLLU257A – February 2017 – Revised February 2018 Submit Documentation Feedback Copyright © 2017–2018, Texas Instruments Incorporated... -
Page 7: Schematic And Bill Of Materials
DP_PWR_RTN Copyright © 2017, Texas Instruments Incorporated DP_PWR Display_Port_Connector_Sink Figure 3. TDP158RSBEVM Schematics (1 of 4) - Input Connectors SLLU257A – February 2017 – Revised February 2018 TDP158 RSB Evaluation Module Submit Documentation Feedback Copyright © 2017–2018, Texas Instruments Incorporated... -
Page 8: Tdp158Rsbevm Schematics (2 Of 4) - Tdp158Rsb Implementation
0 Ohm 0 Ohm 0 Ohm Copyright © 2017, Texas Instruments Incorporated Figure 4. TDP158RSBEVM Schematics (2 of 4) - TDP158RSB Implementation TDP158 RSB Evaluation Module SLLU257A – February 2017 – Revised February 2018 Submit Documentation Feedback Copyright © 2017–2018, Texas Instruments Incorporated... -
Page 9: Tdp158Rsbevm Schematics (3 Of 4) - Regulators
0 Ohm PAGE4 REG_PG Copyright © 2017, Texas Instruments Incorporated Figure 5. TDP158RSBEVM Schematics (3 of 4) - Regulators SLLU257A – February 2017 – Revised February 2018 TDP158 RSB Evaluation Module Submit Documentation Feedback Copyright © 2017–2018, Texas Instruments Incorporated... -
Page 10: Tdp158Rsbevm Schematics (4 Of 4) - Tusb3410 Implementation
SDA_CTL/PRE SDA_AAR CONN PCB 5x2-S Copyright © 2017, Texas Instruments Incorporated Figure 6. TDP158RSBEVM Schematics (4 of 4) - TUSB3410 Implementation TDP158 RSB Evaluation Module SLLU257A – February 2017 – Revised February 2018 Submit Documentation Feedback Copyright © 2017–2018, Texas Instruments Incorporated... -
Page 11: Bill Of Materials
Panasonic ERJ-1GEF49R9C RES SMD 49.9 OHM 1% 1/20W 0201 R42,R77,R78,R80,R81 Yageo RC0402JR-071KL RES SMD 1K OHM 5% 1/16W 0402 SLLU257A – February 2017 – Revised February 2018 TDP158 RSB Evaluation Module Submit Documentation Feedback Copyright © 2017–2018, Texas Instruments Incorporated... - Page 12 MACHINE SCREW PAN PHILLIPS 4-40 Screws Shunts Shunt SHUNT 969102-0000-DA SHUNT SHUNT JUMPER .1" BLACK GOLD TDP158RSBEVM INT043 Printed Circuit Board TDP158 RSB Evaluation Module SLLU257A – February 2017 – Revised February 2018 Submit Documentation Feedback Copyright © 2017–2018, Texas Instruments Incorporated...
-
Page 13: Board Layout
Figure 7 through Figure 12 display the EVM board layouts. Figure 7. Layer 1 (Top) Figure 8. Layer 2 (GND) SLLU257A – February 2017 – Revised February 2018 TDP158 RSB Evaluation Module Submit Documentation Feedback Copyright © 2017–2018, Texas Instruments Incorporated... -
Page 14: Layer 3 (Pwr)
Board Layout www.ti.com Figure 9. Layer 3 (PWR) Figure 10. Layer 4 (PWR) TDP158 RSB Evaluation Module SLLU257A – February 2017 – Revised February 2018 Submit Documentation Feedback Copyright © 2017–2018, Texas Instruments Incorporated... -
Page 15: Layer 5 (Gnd)
Board Layout www.ti.com Figure 11. Layer 5 (GND) Figure 12. Layer 6 (Bottom) SLLU257A – February 2017 – Revised February 2018 TDP158 RSB Evaluation Module Submit Documentation Feedback Copyright © 2017–2018, Texas Instruments Incorporated... -
Page 16: Total Phase Aardvark I C Host Adapter Scripts
Section 2.6.1 ....................... • Changed the Section 2.6.2 ......... • Changed From: TDP158 product preview To: the production datasheet in Section 7 Revision History SLLU257A – February 2017 – Revised February 2018 Submit Documentation Feedback Copyright © 2017–2018, Texas Instruments Incorporated... - Page 17 STANDARD TERMS FOR EVALUATION MODULES Delivery: TI delivers TI evaluation boards, kits, or modules, including any accompanying demonstration software, components, and/or documentation which may be provided together or separately (collectively, an “EVM” or “EVMs”) to the User (“User”) in accordance with the terms set forth herein.
- Page 18 FCC Interference Statement for Class B EVM devices NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
- Page 19 【無線電波を送信する製品の開発キットをお使いになる際の注意事項】 開発キットの中には技術基準適合証明を受けて いないものがあります。 技術適合証明を受けていないもののご使用に際しては、電波法遵守のため、以下のいずれかの 措置を取っていただく必要がありますのでご注意ください。 1. 電波法施行規則第6条第1項第1号に基づく平成18年3月28日総務省告示第173号で定められた電波暗室等の試験設備でご使用 いただく。 2. 実験局の免許を取得後ご使用いただく。 3. 技術基準適合証明を取得後ご使用いただく。 なお、本製品は、上記の「ご使用にあたっての注意」を譲渡先、移転先に通知しない限り、譲渡、移転できないものとします。 上記を遵守頂けない場合は、電波法の罰則が適用される可能性があることをご留意ください。 日本テキサス・イ ンスツルメンツ株式会社 東京都新宿区西新宿６丁目２４番１号 西新宿三井ビル 3.3.3 Notice for EVMs for Power Line Communication: Please see http://www.tij.co.jp/lsds/ti_ja/general/eStore/notice_02.page 電力線搬送波通信についての開発キットをお使いになる際の注意事項については、次のところをご覧ください。http:/ /www.tij.co.jp/lsds/ti_ja/general/eStore/notice_02.page 3.4 European Union 3.4.1 For EVMs subject to EU Directive 2014/30/EU (Electromagnetic Compatibility Directive): This is a class A product intended for use in environments other than domestic environments that are connected to a low-voltage power-supply network that supplies buildings used for domestic purposes.
- Page 20 Notwithstanding the foregoing, any judgment may be enforced in any United States or foreign court, and TI may seek injunctive relief in any United States or foreign court. Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2018, Texas Instruments Incorporated...
- Page 21 IMPORTANT NOTICE FOR TI DESIGN INFORMATION AND RESOURCES Texas Instruments Incorporated (‘TI”) technical, application or other design advice, services or information, including, but not limited to, reference designs and materials relating to evaluation modules, (collectively, “TI Resources”) are intended to assist designers who are developing applications that incorporate TI products;...
Need help?
Do you have a question about the TDP158RSBEVM and is the answer not in the manual?
Questions and answers