Restoring factory settings
To restore factory settings, press buttons
Replacing the batteries
When the message
to be replaced within approximately 1 month. When the message
display, the device can no longer be used and the air conditioning system is set to OFF.
Once the flat batteries have been removed, you have 2 minutes to insert the new batter-
ies (3 alkaline LR03 microlight AAA 1.5V batteries); after this time, the device is restored
to factory settings.
WARNING
Failure to replace the batteries promptly may cause damage to the heating system (frost-
protection is no longer guaranteed).
Inserting the batteries the wrong way round could damage the unit.
The use of flat batteries may cause operating malfunctions.
Technical features
- Unit for domestic use.
- Independently installed electronic
device.
- LCD graphics display.
- Power supply: 3 alkaline LR03 microlight
AAA 1.5V batteries.
- Battery life: more than 1 year.
- Relay characteristics: max. voltage
250V, max. current 5A with resistive
load, 2A with inductive load.
- Type of action: 1B-U.
- Available contacts: 1 NA-NC switch
contact.
+
alternates with the time on the display, the batteries need
- Room temperature measuring interval:
- Reading resolution: 0.1°C.
- Precision: ≤ ±0.3°C.
- Class A software.
- Degree of pollution: 2.
- Impulse voltage: 4 kV.
- Maximum control-head temperature:
- Protection rating: IP30.
- Electrical insulation class II.
- Operating temperature: from 0°C to
+ 1÷7 at the same time, then press R.
15 seconds.
40°C.
+40°C.
shows on the