Use Of The All-Purpose Programme; Setting Automatic Operating Mode - CAME BPT TH/345 Installation And Use Manual

G

Use of the all-purpose programme

The unit includes an all-purpose programme (to be used, for example, when on holiday,
etc.) that can be activated at any time of the current day and remain active until 24:00.
It can also be pre-requested for use on any day of the week.
The factory settings give the all-purpose programme the same profile as that set for
Sunday (7), but it can be customised.
To activate this programme for the current day:
Pull out the unit body.
A
The programme can be personalised (see "Customising the temperatures for the daily
programme" on page 15). At midnight, the device returns to operation in AUTOMATIC
operating mode.
To immediately exit the ALL-PURPOSE programme and return the unit to AUTOMATIC
operation, press button again.
G to end pro-
Press button
gramming.
The procedure ends automatically
after 10 seconds of inactivity.
Setting AUTOMATIC operating
mode.
A.
Press button
The appearance of the
confirms that the programme has
been activated.
icon