To return to AUTOMATIC operation before the programmed period expires, press either
button
again or button .
Setting the temperature differential
The temperature differential can be set between ± 0.1°C and ± 0.9°C.
A
B
To return to MANUAL operation mode before the programmed period expires, press
button T again.
Resetting the device
Operational problems, repairs and other technical reasons may make it necessary for
the unit to be reset.
A
This operation does NOT delete any customised programmes which will be restored,
along with other data, as soon as the unit is restarted.
Pull out the unit body.
Activate MANUAL operation mode
A.
Press button T B.
The temperature differential value
is shown on the screen.
Use buttons
value.
Pull out the unit body.
Press button R A.
to change the