Customising T1, T2 And T3 Temperature Values - CAME BPT TH/345 Installation And Use Manual

The programme set in this way is activated immediately and stays on until the end of
the set time; then the device reverts back to operating in the mode to which it was set
before the timed manual programme was activated.
To return to AUTOMATIC operation before the programmed period expires, press button .

Customising T1, T2 and T3 temperature values

A
B
C
Pull out the unit body.
Setting AUTOMATIC operating
mode.
Press button /
whether you want to set values
T1, T2 or T3 for the heating chart
( ) or the cooling chart (
Press button T.
The temperature value assigned
to range T1 is displayed B.
Use buttons
sired value for T1 C.
to choose
) A.
to set the de-