Pre-Stored Programmes; Manual Function Mode - CAME BPT TH/345 Installation And Use Manual

Pre-stored programmes

A
B
If the pre-set programmes correspond to your requirements, the device does not need to
be programmed any further and is ready for immediate use.

Manual function mode

A
B
To make the device easier to
use, two programmes have been
pre-set for AUTOMATIC operation:
one for heating and one for cool-
ing, where the fixed temperature
levels are:
Heating
Range T1 16°C
Range T2 18°C
Range T3 20°C
Cooling
Range T1 24 °C
Range T2 26 °C
Range T3 28°C
If you wish to momentarily de-
activate automation temperature
control, it is possible to switch to
MANUAL mode by pressing the
button A.
In addition to the current time,
the display also shows the pre-
set manual temperature setup
(20°C).
Use buttons
sired value B.
to set the de-