Advertisement

Quick Links

UV4C-H
USER MANUAL
KEEP THIS MANUAL FOR FUTURE NEEDS

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the UV4C-H and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for GOLDENSEA UV UV4C-H

  • Page 1 UV4C-H USER MANUAL KEEP THIS MANUAL FOR FUTURE NEEDS...
  • Page 2: Table Of Contents

    Thank you for purchasing a GOLDENSEA UV product. You have acquired a powerful and versatile device. We are confident that you will be satisfied with our excellent products and service. For your own safety, please read this user manual carefully before installing and operating the device.
  • Page 3 www.goldenseauv.com Voltage Input: AC 220-240V~, 50/60Hz; Power: 160W; Product Size: 440x370x650mm This device is only for commercial use in non-residential locations, disinfect daily use items such as mobile phone, headset, mask, office stationery, makeup tools, etc., it shall only be used by professional person or adults who are capable of operating this device by following this user manual.
  • Page 4: Installation

    www.goldenseauv.com 1. Installation 1) Place the product on an even surface. 2) Untie the 3 Wire Shelving and place them into position inside the cabinet. Note: The temperature of the bottom wire shelving close to the heat pipe is about 70 , and no combustible materials such as cloth and fiber can be placed.
  • Page 5: Notes

    www.goldenseauv.com Drying+ Disinfect 1) Plug-in to power on. 2) Open the door of the cabinet, place your items onto the wire shelving inside, close the door. 3) Press the AUTO touch key to start. The disinfection time is 30 minutes (First disinfect, the disinfection times is 10 mins, then drying, the drying times is 30 mins), counting-down will be shown on...
  • Page 6 www.goldenseauv.com – Avertissement RISQUE BLESSURES WARNING – RISK OF PERSONAL INJURY CORPORELLES THIS EQUIPMENT IS DESIGNED FOR CET ÉQUIPEMENT EST CONÇU POUR ÊTRE USE WITH GERMICIDAL LAMPS OR UV UTILISÉ AVEC DES LAMPES GERMICIDALES OU SOURCES AND MUST BE INSTALLED DES SOURCES UV ET DOIT ÊTRE INSTALLÉ...
  • Page 7: Product Overview

    www.goldenseauv.com 5. Product Overview 1) LED Display 7) Protective Grid 2) Drying - touch key 8) UV Tube 3) Disinfect - touch key 9) Power Cable 4) Auto - touch key 10) Safety Catch 5) Sound (Volume) - touch key 11)...
  • Page 8: Replacing The Uv Tube

    www.goldenseauv.com 7. Replacing The UV Tube To maintain the sterilizing efficacy, the UV tube needs to be replaced after 6,000 hours of use. Steps: 1. Wait for UV tube to cool down (to avoid scalding) after switching off the device. 2.
  • Page 9: Troubleshooting Tips

    www.goldenseauv.com 8. Troubleshooting Tips 8.1 What to do if the device doesn’t work? 1. Ensure the device is plugged into a working wall socket. 2. Ensure the plug is wired correctly and terminal well-connected. 3. If you still have issues with the device, please contact your local dealer or our customer service for assistance.
  • Page 10: Cleaning And Maintenance

    www.goldenseauv.com 10. Cleaning and Maintenance 1. To ensure the device remains in good condition and does not fail prematurely, regular maintenance, cleaning and checks are required. 2. For cleaning of the device, please use a lint-free cloth. 3. To avoid damage to the device, never use detergent or solvents. 4.

Table of Contents