Table Of Contents - Task Force Tips Ball Intake Valve Instructions For Installation, Safe Operation And Maintenance
Hide thumbs
Also See for Ball Intake Valve:
Table of Contents
Advertisement
OPERATING RANGE:
For Ball Intake Valves
Pressure Max 300 PSI (20 bar)
For Jumbo Ball Intake Valves
Pressure Max 250 PSI (17 bar)
Pressure Min Full Vac.
Hydrostatic Proof Test:
900 PSI (62 bar)
per NFPA 1965
Six seconds from open to close
meets NFPA 1901
slow close requirement.
©Copyright Task Force Tips, LLC 2002 - 2018
Table Of Contents
The member companies of FEMSA that provide emergency response
equipment and services want responders to know and understand the
following:
1. Firefighting and Emergency Response are inherently dangerous activities
requiring proper training in their hazards and the use of extreme caution
at all times.
2. It is your responsibility to read and understand any user's instructions,
including purpose and limitations, provided with any piece of equipment
you may be called upon to use.
3. It is your responsibility to know that you have been properly trained in
Firefighting and /or Emergency Response and in the use, precautions, and
care of any equipment you may be called upon to use.
4. It is your responsibility to be in proper physical condition and to maintain
the personal skill level required to operate any equipment you may be
called upon to use.
5. It is your responsibility to know that your equipment is in operable
condition and has been maintained in accordance with the manufacturer's
instructions.
6. Failure to follow these guidelines may result in death, burns or other
severe injury.
FEMSA
2
DANGER
PERSONAL RESPONSIBILITY CODE
Fire and Emergency Manufacturers and Service Association
P.O. Box 147, Lynnfield, MA 01940 • www.FEMSA.org
LIA-200 March 20, 2018 Rev19
- Quick Links:
- Ball Intake Valve Ab & Ac...
- Repair
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Ball Intake Valve and is the answer not in the manual?
Questions and answers