EMS Easy Motion Skin Instruction Manual page 25

Spin drying
The MotionSkin can be spun at 400 rpm after washing.
Drying
The MotionSkin should be air-dried hanging on a hanger, with the elec-
trodes turned inside out.
PLEASE NOTE
Damage caused by disinfectants
Disinfectants contain isopropyl alcohol (or
similar). These negatively affect the conduc-
tivity of the MotionSkin by washing out the
silver nano-particles.
The manufacturer has produced the Motion-
Skin using anti-bacterial fibres.
 Do not disinfect the MotionSkin.
INFORMATION
Residual dampness after spinning
The MotionSkin can be used immediately af-
ter spin drying. It may still feel slightly damp,
which is not an issue when in use and actu-
ally enhances the functionality of the elec-
trodes.
PLEASE NOTE
Damage caused by drying
The MotionSkin should be air-dried. If dried
in a tumble dryer or in direct UV radiation.
the material can be damaged.
 Do not dry the MotionSkin in a tumble
dryer.
 Do not put the MotionSkin in direct sunlight
(UV radiation).
19