Setting Up The Motionskin; Connecting The Powerbox To The Motionskin - EMS Easy Motion Skin Instruction Manual

Please choose a properly-fitting MotionSkin in the correct size.
Setting up the
Set up the dry MotionSkin, initially without a Powerbox. You must en-
MotionSkin
sure the electrodes are sitting correctly and securely on the respective
muscles to be stimulated. It they are loose or not secure, the electrode
may not be connected to the skin or the electrode connection may be
lost during training. Depending on the programme setting, this may
lead to a reduction in stimulation or the electrode channel in question
until the connection is re-established properly.
Your retailer will advise you on selecting the correct size. If in doubt, the
fit of the MotionSkin can also be optimised using the tension straps sup-
plied. Overexpansion of the MotionSkin must be avoided as it may lead
to damage.
Connect the Powerbox with the
MotionSkin The push buttons on
Connecting the
Powerbox to
the MotionSkin should be con-
the MotionSkin
nected with their counterparts
(paddles) on the Powerbox as
depicted.
During training, the Powerbox
should be kept in the pocket pro-
vided on the MotionSkin. Ensure
the Powerbox is held securely
and firmly to make sure it does
not fall out accidentally.
11