Read And Evaluate Data; Start Rfid Scan And Identify Tags - Siemens Simatic RF610M Operating Instructions Manual

Read and evaluate data

5.1

Start RFID scan and identify tags

5.1
Proceed as follows to start the RFID scan and tag identification:
1. Start the user application on the reader (Start > Programs > SIMATIC RF610M). The
Figure 5-1
2. Select the required presentation format of the RFID tag under View. The following options
User application for RF610M Mobile Reader
Operating Instructions, Edition 12/2005, D0175-U001-A0-7618
main window for the application is displayed.
In the edit box below the menu bar, you can see the path of the XML file in which you can
save the acquired data later. The XML files are stored automatically for each calendar
day as separate files with a date stamp in the name. The file name is in the following
form: RF610M_YYMMDD_Device Name.xml
Alternatively, before scanning, you can create an empty XML file with any preferred name
(File > New). This file is then filled with your scan data.
Main window of the application
are available for selection: Binary, Octal or Hexadecimal.
5
5-1