Table of Contents
Advertisement
Installing Software
Requirement
To install the user application for the SIMATIC RF610M Mobile Reader, you will need the
following hardware and software components:
• Product CD "User application for SIMATIC RF610M Mobile Reader".
• Microsoft Active Sync from Version 3.4
• PC with Windows 2000 / XP and integrated Microsoft .Net Framework Version 1.1 and
Procedure
1. Install Microsoft Active Sync on the PC
2. Install a USB driver for SIMATIC RF610M Mobile Reader on the PC
3. Establish a partnership between the PC and the SIMATIC RF610M Mobile Reader
4. Install the user application for the SIMATIC RF610M Mobile Reader
User application for RF610M Mobile Reader
Operating Instructions, Edition 12/2005, D0175-U001-A0-7618
higher
Note
Download of Microsoft Active Sync
Microsoft Active Sync is not part of the scope of supply. However, the current version of
the application can be downloaded from www.microsoft.com.
Notice
Compatible Microsoft .Net Framework Version
Check under Start > Settings > Control Panel > Software whether you have Microsoft
.Net Framework of Version 1.1 or higher on your PC. If this is not the case, download an
update from www.microsoft.com.
Note
Necessary Installation Steps
If the user application is already installed on your reader, only perform installation steps
1 to 3.
3
3-1
Advertisement
Table of Contents
