Table of Contents
Advertisement
To Reformat in Mac OS 10.
Caution: This will destroy any data on the hard drive. Backup any
data before you continue with the reformatting of the EZ Bus DTC
hard drive.
1
Make sure the EZ Bus DTC is plugged into the USB port. The drive
should appear as a drive on your desktop.
.
Open the "Applications" folder on your hard drive, go to the "Utilities"
folder and select Disk Utilities.
. Select the drive from the list:
a. A description of the drive appears in the window.
b. Connection bus should be USB .0.
. Select the Erase tab on the top of the window.
5. From the volume format drop down list, select the Mac OS Extended .
6. Enter EZ Bus DTC into the Name box.
. Select the check box next to Install Mac OS 9 Drivers . This will allow
you to see your EZ Bus DTC hard drive if you boot to Mac OS 9.x
. Click the Erase button: An alert will appear to confirm the erase
process.
9. Click the Erase button to start the formatting process.
10. To confirm that the EZ Bus DTC hard drive is properly formatted, Select
the EZ Bus DTC drive, then Select: File, Get Info . The format should
read Mac OS Extended.
The Leader in Personal Storage
Advertisement
Table of Contents
