Apricorn EZ-BUS-DTC 250GB User Manual page 31

To Reformat in OS 9.x:
Caution: This will destroy any data on the hard drive. Backup any
data before you continue with the reformatting of the EZ Bus DTC
hard drive.
1. Make sure the EZ Bus DTC is plugged into the USB port.
2. Disable the file exchange in the Extensions Manager :
a. From the Apple Menu , select Control Panel , then Extensions
Manager .
b. From the list: uncheck the on/off button next to the File
Exchange .
c. Click Restart .
Your Macintosh will restart and you will get the following message:
"This disk is unreadable by this computer
Do you want to initialize the disk?"
. Enter EZ Bus DTC into the Name box.
. From the drop down list, select Mac OS Extended and click the
Initialize button. After the drive is initialized the drive named EZ Bus
DTC will appear on your desktop.
5. To confirm that the EZ Bus DTC hard drive is properly formatted,
select the EZ Bus DTC drive, then Select: File, Get Info, General
Information . The drive should read Mac OS Extended.
6. You can now enable the file exchange extension.
a. From the Apple Menu , select Control Panel, Extensions
Manager .
b. Check the on/off box next to File Exchange .
c. Click Restart .
www.apricorn.com 1