Use With Salt Water; Various Models And Terms - Task Force Tips MASTERSTREAM Series Instructions For Safe Operation And Maintenance

Deluge nozzles with automatic pressure control

Hide thumbs Also See for MASTERSTREAM Series:

Table of Contents

2.1 USE WITH SALT WATER

Use with salt water is permissible provided nozzle is thoroughly cleaned with fresh water after each use. The service life of the

nozzle may be shortened due to the effects of corrosion and is not covered under warranty.

The spray pattern is changed from wide fog to straight stream by means of the "stream shaper". Models are available with five

different methods to move the stream shaper as shown in figures 1A - 1E. See catalog for model numbers and details.

Halo Ring

Coupling

Fig 1A Stream Shaper moved

manually by rotating "halo ring"

Hydraulic Ports

Fig 1C Stream Shaper moved

remotely by hydraulics

Fig 1E Stream Shaper moved

by linear (push/pull) motion

from user's mechanism

©Copyright Task Force Tips, Inc. 1999-2005

Stream Shaper

Manual Override Knob

(Masterstream 1250 &

Masterstream 2000 Only)

FIG 1 - Methods for Moving Stream Shaper

Serial Number

Bumper

Fig 1B Stream Shaper moved

manually by rotating "bumper"

Hold lever down and turn knob

for manual override.

Fig 1D Stream Shaper moved

remotely by electricity (12-24 volts)

Lever

LIM-030 October 12, 2005 Rev 05

Table of Contents