Correct Use; Disposal - bihl+Wiedemann BWU2236 User Manual

AS-i Safety Relay Output Module with Diagnostic Slave
1 EDM- and 2/1 safety inputs
Safety
3.3

Correct use

The AS-i Safety Relay Output Module with Diagnostic Slave must only be used
as defined in chap. Application area of the device. The AS-i Safety Relay Output
Module with Diagnostic Slave must only be used on the system, at which it was
installed in accordance with this manual by adept personnel.
Information!
If used in a way differing from this description or if the device has been changed in any
way – even during installation – any warranty claims with respect to Bihl+Wiedemann
GmbH are invalid.
3.3.1

Disposal

Information!
Electronic waste is hazardous waste. Please comply with all local ordinances when
disposing this product!
The device does not contain batteries that need to be removed before disposing it.
Subject to technical modififications; no responsibility is accepted for the accuracy of this information
Internet: www.bihl-wiedemann.de • Flosswoerthstr. 41 • D-68199 Mannheim
© Bihl+Wiedemann GmbH
phone: +49 621 33 996-0 • fax: +49 621 3 39 22 399
9