Table of Contents
Advertisement
AS-i Safety Relay Output Module with Diagnostic Slave
1 EDM- and 2/1 safety inputs
General Remarks
2.
General Remarks
Please read this chapter carefully before working with the documentation and the
"AS-i Safety Relay Output Module with Diagnostic Slave".
2.1
Product information
This user manual is valid for the following Bihl+Wiedemann GmbH devices
AS-i Safety Relay Output Module with Diagnos-
tic Slave
for all special versions, derived from the basic "AS-i Safety Relay Output Module with Diagnostic Slave".
2.2
Function of this manual
This manual instructs for the safe assembly, electrical installation, addressing,
start-up as well as for the operation and for the maintenance of the AS-i Safety
Relay Output.
This manual does not provide instructions for operating machines, on which this
module is built in. Please view the appropriate machine manual for corresponding
information.
Information!
Additional information concerning the technical data as well as the parameterization of
the AS-i Safety Relay Output can be found in data sheet BWU2236 that can be loca-
ted at http://www.bihl-wiedemann.de.
2.3
Target group
This manual is intended for designers, developers and operators of systems that
will be safeguarded by one or more AS-i Safety Relay Outputs. The manual is
also targeted to people integrating AS-i Safety Relay Outputs into machinery, per-
forming the initial start-up, or maintaining them.
2.4
AS-i specifikation 3.0
The "AS-i Safety Relay Output Module with Diagnostic Slave" is designed ac-
cording to the AS-i specification 3.0.
Earlier specifications (2.1 and 2.0) continue to be fully supported.
Subject to technical modififications; no responsibility is accepted for the accuracy of this information
Internet: www.bihl-wiedemann.de • Flosswoerthstr. 41 • D-68199 Mannheim
BWU2236
© Bihl+Wiedemann GmbH
phone: +49 621 33 996-0 • fax: +49 621 3 39 22 399
:
7
Hide quick links:
Advertisement
Table of Contents
