Technical Data - bihl+Wiedemann BWU2236 User Manual

AS-i Safety Relay Output Module with Diagnostic Slave
1 EDM- and 2/1 safety inputs
Product Description
4.2

Technical data

Article no.
Inputs
Outputs
Max. resistance
between S 11 - S12; S 21 - S 22
AS-i profile diagnostic AB slave
ID1 Code diagnostic AB slave
AS-i profile safety input
ID1 Code safety input
External device monitoring (EDM)
Indicators
2 x LED yellow (S 1, S 2)
1 x LED yellow (R)
1 x LED yellow (1.Y1)
LED green (PWR)
LED red (FAULT)
LED yellow (OUT)
LED red (ALARM)
Current input out of AS-i
Operating voltage
AUX voltage supply
ext. in
Voltage of insulation
(relay contact for AS-i resp. AUX
Current input out of AUX
Voltage of insulation AS-i to AUX
Current capacity max. I+
Applied standards
Housing
Ambient operating temperature
Storage temperature
Dimensions (L / W / H in mm)
Protection class DIN EN 60 529
Subject to technical modififications; no responsibility is accepted for the accuracy of this information
Internet: www.bihl-wiedemann.de • Flosswoerthstr. 41 • D-68199 Mannheim
BWU2236
1 EDM, diagnostic,
2 / 1 safety inputs (Cat. 4/SIL 3)
1 relay
3 A, 24 V, DC-13 or 3 A, 230 V, AC-15
150 Ohm
S-7.A.E
5 (default), value modifiable
hex
S-7.B.0
F (default), value modifiable
hex
reference potential over I+, I-
state of safety inputs
(S 11 - S 12, S 21 - S 22)
release status
state of EDM input 1.Y1
AS-i voltage ON
AS-i Fault
for definition see table "device colors"
PLC inidicates alarm
< 200 mA
AS-i (30 V
DC
24 V (± 20%)
DC
6 kV
)
ext. in
< 30 mA
ext. in
500 V
ext. in
max. 100 mA
EN 954-1 Cat 4
IEC 61 508 SIL 3
EN 13 849-1/PLe Cat 4
EN IEC 62 061 SIL 3
din-rail mounting
0°C ... +55 °C
-25°C ... +85 °C
114 / 22,5 / 99
IP20 (only for use in electrical service
rooms / cabinets with minimum IP54
protection suitable)
)
© Bihl+Wiedemann GmbH
phone: +49 621 33 996-0 • fax: +49 621 3 39 22 399
Tab. 4-1.
11