Daikin Siesta ATXM20R2V1B User Reference Manual page 36

6 | Operation
To connect the wireless LAN to your home network
To connect using the WPS button
To connect using SSID and KEY number
User reference guide
36
If operation LED... ...and timer LED...
is off blinks in 0.5 second
interval
is off blinks in 1 second
interval
4 Press to exit the menu.
Result: The display will return to the default screen.
The wireless adapter can be connected to your home network using the:
▪ WPS button on the router (if present),
▪ SSID and KEY number located on the unit.
1 On home screen menu, hold
operating.
Result: The SP menu appears. is blinking.
2 Change to the SP menu by pressing
(5 sec.)
3 Press to confirm the selection.
Result: is blinking. The timer LED is blinking in 0.5 s interval and the
operation LED is off.
4 Press the WPS button on your communication device (e.g. router) within
approximately 1 minute. Refer to the manual of your communication device.
Result: If the connection to your communication device is successful, the
timer LED is blinking in 1.0 s interval and the operation LED is off.
INFORMATION
If the connection with your router is not possible, try procedure
SSID and KEY number" [
5 Press to exit the menu.
Result: The display will return to the default screen.
1 On home screen menu, hold
operating.
Result: The SP menu appears. is blinking.
2 Change to the SP menu by pressing
...then wireless LAN is...
running and ready to connect to the
home network via WPS button on
the router.
▪ connected to the home network
via SSID + KEY.
or
▪ connected to the home network
via WPS button on the router.
for at least 5 seconds while the unit is not
once or
1×
4 36].
for at least 5 seconds while the unit is not
twice or
ATXM20~35R2V1B + ATXM50R2V1B + ATXM20~35R5V1B
repeatedly.
"To connect using
repeatedly.
Daikin room air conditioner
4P518786-6F – 2020.06