Daikin Siesta ATXM20R2V1B User Reference Manual page 37

To reset the connection setting to the factory default
To turn off the wireless LAN connection
ATXM20~35R2V1B + ATXM50R2V1B + ATXM20~35R5V1B
Daikin room air conditioner
4P518786-6F – 2020.06
(5 sec.)
3 Press to confirm the selection.
Result: is blinking. The timer LED and operation LED are blinking
simultaneously.
4 Open the Daikin Residential Controller application on your smart device and
follow the steps on the screen.
Result: If the connection to your smart device is successful, the timer LED is
blinking in 1.0 s interval and the operation LED is off.
5 Press to exit the menu.
Result: The display will return to the default screen.
Reset the connection setting to the factory default in case you want to:
▪ disconnect the wireless LAN and the communication device (e.g. router) or smart
device,
▪ repeat the setting if the connection was unsuccessful.
1 On home screen menu, hold
operating.
Result: The SP menu appears. is blinking.
2 Change to the SP menu by pressing
(5 sec.)
3 Hold for at least 2 seconds to confirm the selection.
Result: is blinking. The operation and timer LEDs are blinking at the same
time in 1 s interval. The setting is reset to the factory default.
4 Press to exit the menu.
Result: The display will return to the default screen.
If you want to turn off the wireless connection function:
1 On home screen menu, press
operating.
Result: The SP menu appears. is blinking.
2 Change to the SP menu
(5 sec.)
2×
for at least 5 seconds while the unit is not
twice or
2×
for at least 5 seconds while the unit is not
by pressing once or
1×
6 Operation
|
repeatedly.
repeatedly.
User reference guide
37