Nomenclature; Features & Options - KeepRite KLP Series Product Data & Installation

NOMENCLATURE

Low Profile Evaporator
Number of Fans
Nominal Capacity:
x 1000 @ 10°F TD, BTU/h
Application Range:
M = Medium to HighTemp 6 FPI (10°F to 45°F Evap Temp)
L = Low Temp 6 FPI (-40°F to 0°F Evap Temp)
V = Low Temp 4 FPI (-40°F to 0°F Evap Temp)
STANDARD FEATURES
• EC motors with patented SmartSpeed® Technology.
• Compatible with Low GWP Refrigerants
• High efficiency and high strength fan guard
• Front access
• Internally enhanced tubing
• Convenient mounting brackets
• Ample electrical and header compartments
AVAILABLE OPTIONS
• ESP+ Intuitive Evaporator Control Technology.
See page 15
• Hot gas loop pan with hot gas defrost models
• Factory installed expansion valve, solenoid valve and room
thermostat
K30-KLPD-PDI-4
KLP 3 16 L E - S2 D
• Liquid line solenoid valve wire harness factory installed
• Schrader valve on suction header
• Positive slope, hinged drain pan
• Central drain connections (approximate)
• Universal drain fitting
• Large 3/4" ID (3/4" MPT) drain hole
• Factory installed distributor nozzle
• Wire fan guard
• Corrosion protection: alternate fin materials and coatings
• Additional options available, please contact factory
- 2 -
KLP - LOW PROFILE EVAPORATORS
Design Generation
Voltage:
S1 = 115/1/60 T3 = 208-230/3/60
S2 = 208-230/1/60
Defrost:
A = Air E = Electric
T = 3 Pipe Hot Gas w/ Electric Heater Pan
H = 3 Pipe Hot Gas w/ Hot Gas Loop Pan
G = Reverse Cycle w/ Electric Heater Pan
R = Reverse Cycle w/ Hot Gas Loop Pan
14/10/20