Advertisement
before it is cleaned and whilst being repaired.
Repairs to electrical appliances should only be performed by a qualified
electrician. Improper repairs may place user at serious risk.
Do not operate this appliance with a damaged plug or cord, after a malfunction
or after being dropped or damaged in any way.
Regular, periodic checks should be carried out on the mains cable to ensure
no damage is evident. Should there be any signs of damage the appliance
should not be used.
If the power cable is damaged, it should only be replaced by the manufacturer
or a suitable qualified after-sales-service in order to avoid a hazard
Do not allow the mains cable to hang over sharp edges or come in contact with
hot surfaces.
Do not run the mains cable under carpets, rugs, etc.
Allow the unit to cool before storage.
Before cleaning, disconnect the appliance from the mains supply and allow to
cool.
Never place the appliance near to flammable material or high pressure
containers. (e.g., Paper, wood, petrol, solvents, spray canisters etc.)
This appliance is intended for household use only and should not be used for
industrial purposes.
Do not use any accessories or attachments with this appliance other than those
supplied or recommended by supplier.
Do not use this appliance for anything other than its intended use.
Do not push objects into any openings as damage to the appliance and/or
electric shock may occur.
Ensure appliance is situated in an open area, do not allow it to come in contact
with Cupboards, Curtains, wall coverings, clothing or other flammable
materials.
The appliance should not be installed in areas which have a fire-risk, such as
garages, stables or wooden sheds; this is applicable also for rooms in which
highly inflammable gasses or dust can develop. Danger of fire!!
Even at the lowest setting level the unit is in use. In order to switch off the frost
protector pull out the power plug.
Unplug after each use. Grasp the plug, not the cord.
NB
During the first few minutes of initial use, you may notice a slight
odour and a little smoke. This is normal and will quickly disappear, It is
the coating applied to the heating elements to prevent any corrosion
during transit.
Advertisement
