Download
Share
Print this page
Daewoo electricals HEA1200 Instruction Manual
  1. Manuals
  2. Brands
  3. Daewoo electricals Manuals
  4. Heater
  5. HEA1200
  6. Instruction manual

Daewoo electricals HEA1200 Instruction Manual

2000w flame effect stove heater
Hide thumbs
1
2
3
4
5
6
7
8
9

Advertisement

Quick Links

Download this manual
This product is only suitable for well insulated spaces or occasional use.

Advertisement

loading

Related Manuals for Daewoo electricals HEA1200

Summary of Contents for Daewoo electricals HEA1200

  • Page 1 This product is only suitable for well insulated spaces or occasional use.

  • Page 2: Important Safeguards

    IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed. These instructions should be saved for future reference:  Read and familiarise yourself with all operating instructions before using this Stove Effect Heater.  Before plugging your unit into the mains, visually check that the unit is intact and has not suffered any transit damage.

  • Page 3: This Appliance Must Be Earthed

     bath, shower or a swimming pool.  Do not use this heater in small rooms when they are occupied by persons not capable of leaving the room on their own, unless constant supervision is provided.  Do not immerse the appliance or its cord in water or any other liquids. ...
  • Page 4 During the first few minutes of initial use, you may notice a slight odour and a little smoke. This is normal and will quickly disappear, It is the coating applied to the heating elements to prevent any corrosion during transit. Description of Parts Flame Effect Door Control Panel Door...
  • Page 5  Insert the mains plug into the mains socket.  For the low heat setting, press the 1000w heat switch (3) and the fan switch (2).  For the high heat setting, press both the 1000w heat switches (3 & 4) and the fan switch (2).
  • Page 6 220-240V ~ 50Hz Rated power 2000 W Model Number HEA1200 Electrical Connections This appliance is fitted with a fused three-pin plug to BS 1363. If the plug has to be removed, it should be cut off and carefully disposed of immediately.
  • Page 7  The Green and Yellow wire must be connected to the terminal marked E or coloured Green.  Check that there are no cut or stray strands of wire inside the plug.  Use a 13 Amp BS 1362 fuse, only use BSI or ASTA approved fuses. ...
  • Page 8 ERP Data HEA1200 Model Item Symbol Value Unit Item Unit Heat output Type of heat input, for electric storage local space heaters only (select one) Nominal heat manual heat charge control, with Not applicable output integrated thermostat Minimum manual heat charge control with room...