Related Manuals for Daewoo electricals HEA1187
Summary of Contents for Daewoo electricals HEA1187
- Page 1 Before plugging your unit into the mains, visually check that the unit is intact and has not suffered any transit damage.
-
Page 2: Important Safeguards
IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed. These instructions should be saved for future reference: Read and familiarise yourself with all operating instructions before using this Mini Convector Heater. Before plugging your unit into the mains, visually check that the unit is intact and has not suffered any transit damage. - Page 3 before it is cleaned and whilst being repaired. Repairs to electrical appliances should only be performed by a qualified electrician. Improper repairs may place user at serious risk. Do not operate this appliance with a damaged plug or cord, after a malfunction or after being dropped or damaged in any way.
- Page 4 Description of parts Rear Mounting Bracket Heat Outlet Heat Indicator Lamp Adjustable Thermostat On/Off Switch Feet Air Inlet Assembling your Mini Convector Heater Fitting the Feet Before using this heater, the feet must be fitted to the unit. These are attached to the base of the heater using the four self-tapping screws provided, take care to ensure that they are located correctly in the holes at either end of the base of the appliance:...
- Page 5 Wall Mounting Your Mini Convector Before wall mounting your Mini Convector, please be aware of the minimum distances from the walls, ceiling and floor as shown below: Ceiling Wall Heater Wall Floor Once the desired mounting position has been chosen, fasten the mounting bracket to the wall as follows.
- Page 6 Clean outside of the heater with a clean damp cloth. Never clean with harsh or abrasive cleaners. Do not submerge any part of heater in water or any other liquids. Technical Data Voltage 220-240V AC 50Hz Rated power 450 W Model Number : HEA1187...
- Page 7 Electrical Connections This appliance is fitted with a fused three-pin plug to BS 1363. If the plug has to be removed, it should be cut off and carefully disposed of immediately. To avoid a possible shock hazard, do not insert the discarded plug into a mains socket.