Vermeer BC1000XL Operator's Manual page 52

NOTE: The discharge chute is equipped with a stop to prevent discharging material over
the feed table area. The discharge chute can be rotated 270° to direct the chips to the
desired position.
Step 2: To adjust discharge distance, raise
or lower discharge chute deflector
(3).
• Standard deflector
Loosen locking handle (4).
Adjust deflector height.
Tighten locking handle to
secure the adjusted deflector.
• Remote deflector control
(option)
Loosen lock (5) and turn crank
(6). Tighten lock handle to
secure the adjusted deflector.
40-6 Preparing the Brush Chipper and Work Area
3
4
OPERATOR
AREA
WHEN
FEEDING BRUSH
CHIP
DISCHARGE
AREA
6
5
BC1000XL Brush Chipper