Vermeer BC1000XL Operator's Manual page 28

(5) Rear Warning Light - center
BC1000XL
BC1000XL Units Only:
Normal sensitivity setting selected . . . . . . . . . . . . warning light off
Reduced sensitivity setting selected . . . . . . . . . . . . warning light on
BC1000XL and BC1000XL EU Units:
5
• Flashes quickly when feed roller needs to be restarted after
pressing Lower Feed Stop Bar or pulling Upper Feed Control Bar.
• Flashes slowly if engine shuts down due to high water
temperature or low oil pressure.
NOTE: When the Rear Warning Light flashes quickly, the Hold-to-
Run Button (3) must be pushed to reset stop system and stop
BC1000XL EU
warning light from flashing.
5
20-8 Controls BC1000XL Brush Chipper
3_06 3_01