Vermeer BC1000XL Operator's Manual page 5

VERMEER NEW INDUSTRIAL EQUIPMENT LIMITED WARRANTY
(EFFECTIVE NOVEMBER 1, 2006) WARRANTY PERIOD: 12 Months / 1000 Hours
Vermeer Mfg. Company (hereinafter "Vermeer") warrants each new Industrial product of Vermeer's manufacture to be free from
defects in material and workmanship, under normal use and service for one (1) full year after initial purchase/retail sale or 1000
operating hours, whichever occurs first. This Limited Warranty shall apply only to complete machines of Vermeer's manufacture,
parts are covered by a separate Limited Warranty. EQUIPMENT AND ACCESSORIES NOT OF VERMEER'S
MANUFACTURE ARE WARRANTED ONLY TO THE EXTENT OF THE ORIGINAL MANUFACTURER'S WARRANTY
AND SUBJECT TO THEIR ALLOWANCE TO VERMEER ONLY IF FOUND DEFECTIVE BY SUCH MANUFACTURER.
EXTENDED WARRANTY OPTIONS ARE AVAILABLE FOR PURCHASE
WARRANTY TERMS
During the Limited Warranty period specified above, any defect in material or workmanship in any warranted item of Vermeer
Industrial Equipment not excluded below shall be repaired or replaced at Vermeer's option without charge by any authorized
independent Vermeer dealer. The warranty repair or replacement must be made by a Vermeer independent authorized dealer at the
dealer's location. Vermeer will pay for replacement parts and such authorized dealer's labor in accordance with Vermeer's labor
reimbursement policy. Vermeer reserves the right to supply remanufactured replacement parts as it deems appropriate.
RETAIL PURCHASER RESPONSIBILITY: This Limited Warranty requires proper maintenance and periodic inspections of the
Industrial Equipment as indicated in the Operator's Manual furnished with each new Industrial Equipment. The cost of routine or
required maintenance and services is the responsibility of the retail purchaser. The retail purchaser is required to keep documented
evidence that these services were performed.
This Vermeer New Industrial Equipment Limited Warranty may be subject to cancellation if the above requirements are not
performed.
Vermeer Industrial Equipment with known failed or defective parts must be immediately removed from service.
BC1000XL Brush Chipper 3_05 -3