Advertisement
INSTRUCTIONS FOR RESETTING BROTHER TN 2010
Brother has introduced a small flag gear in its cartridges that resets the printer. You will need to reset the flag
gear in order to reset the cartridge. Follow instructions below.
Starter cartridges
*Please note that the starter cartridges (ship with
new printers) do not have the reset gear included.
You will need to purchase a reset gear.
Remove the 2 screws as shown opposite.
Very carefully remove the end cover plate to reveal
the reset gear and various cogs.
We do not want to dislodge any cogs or gears so
be careful!
© Zinetic.co.uk. All Rights Reserved
Toner that doesn't cost the earth
Printed on recycled paper, using refilled cartridges
Starter cartridge shown above.
Advertisement
