Osd Warning Messages - Dell S2722DGM User Manual

OSD warning messages

When the monitor does not support a particular resolution mode, the following
message is displayed:
This means that the monitor cannot synchronize with the signal that it is receiving
from the computer. See
frequency ranges addressable by this monitor. Recommended mode is 2560 x 1440.
Before the DDC/CI function is disabled, the following message is displayed:
When MPRT attempts to work but the frame rate is less that 120 Hz, the following
message is displayed:
When the monitor enters the Standby mode, the following message is displayed:
Dell 27 Gaming Monitor
The current input timing is not supported by the monitor display. Please
change your input timing to 2560x1440, 165Hz
listed timing as per the monitor specifications.
Monitor specifications
Dell 27 Gaming Monitor
The function of adjusting display setting using PC application will be
Do you wish to disable DDC/CI function?
Yes
Dell 27 Gaming Monitor
Refresh rate too low, please set refresh rate to 120Hz or higher to turn on MPRT.
Dell 27 Gaming Monitor
Going into Standby mode...
or any other monitor
S2722DGM
for the Horizontal and Vertical
disabled.
No
S2722DGM
S2722DGM
S2722DGM
Operating the monitor | 47