1. Manuals
  2. Brands
  3. Dell Manuals
  4. Monitor
  5. S2721DB
  6. Simplified service manual

Dell S2721DB Simplified Service Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Simplified Service Manual–S2721DB/ S2721DSB
Version: 01
Date:2021/03/08

Advertisement

Table of Contents
loading

Related Manuals for Dell S2721DB

Summary of Contents for Dell S2721DB

  • Page 1 Simplified Service Manual–S2721DB/ S2721DSB Version: 01 Date:2021/03/08...

  • Page 2: Table Of Contents

    Content Index 1. General Safety Instructions ..................3 1.1 SAFETY: General Safety ..................3 1.2 SAFETY: General Power Safety ................5 2. Exploded view diagram with list of items ..............6 3. Wiring connectivity diagram ..................8 4. Disassembly and Assembly Procedures ..............9 4.1 Disassembly SOP ....................

  • Page 3: General Safety Instructions

    IMPORTANT NOTICE FOR USE IN HEALTHCARE ENVIRONMENTS: Dell products are not medical devices and are not listed under UL or IEC 60601 (or equivalent). As a result, they must not be used within 6 feet of a patient or in a manner that directly or indirectly contacts a patient 1.1 SAFETY: General Safety...
  • Page 4 When operating your equipment:  Do not use your equipment in a wet environment, for example, near a bath tub, sink, or swimming pool or in a wet basement.  Do not use AC powered equipment during an electrical storm. Battery powered devices may be used if all cables have been disconnected.

  • Page 5: Safety: General Power Safety

     socket. If your equipment uses an AC adapter: Use only the Dell provided AC adapter approved for use with this device. Use of another AC  adapter may cause a fire or explosion. NOTE: Refer to your system rating label for information on the proper adapter model ...

  • Page 6: Exploded View Diagram With List Of Items

    2. Exploded view diagram with list of items S2721D: Item Description Q'ty ASSY DECO BTN OSD PCBA CTRL BD Panel PCBA SPS BD PCBA I/F BD ASSY SHD SPK*2 ASSY RC ASSY STAND COLUMN ASSY STAND BASE ASSY COVER VESA Power cable HDMI cable...
  • Page 7 S2721DS: Item Description Q'ty ASSY DECO BTN OSD PCBA CTRL BD Panel PCBA SPS BD PCBA I/F BD ASSY SHD SPK*2 ASSY RC ASSY STAND COLUMN ASSY STAND BASE Power cable HDMI cable...

  • Page 8: Wiring Connectivity Diagram

    3. Wiring connectivity diagram Wire 1 FFC 1 FFC 2 FFC 3 - 8 -...

  • Page 9: Disassembly And Assembly Procedures

    4. Disassembly and Assembly Procedures 4.1 Disassembly SOP Preparation before disassemble 1. Clean the room for disassemble 2. Identify the area for monitor 3. Check the position that the monitors be placed and the quantity of the monitor; prepare the area for material flow;...
  • Page 10 S2720DS: 1. Place the monitor on a soft cloth or cushion. 2. Press and hold the stand release button at the back of the display. Lift the stand assembly up and away from the monitor. S2721D: Philips- 1. Unlock 2 Stand screws head screwdriver 2.
  • Page 11 1. Pull out SPK wire from I/F BD 1. Tear off AL Tape 2. Pull out CTRL FFC from I/F BD 3. Pull out backlight wire from SPS BD 1. Unlock 4 Main SHD Philips- screws head screwdriver Torsion of Main SHD screw: 6~7kgf...
  • Page 12 1. Disassemble Safety Mylar from SPS BD 1. Unlock 8 PCBA Philips- screws head screwdriver 2. Disassemble I/F BD & SPS BD from Main Torsion of PCB screw: 6~7kgf 3. Pull out FFC LVDS from I/F BD - 12 -...

  • Page 13: Assembly Sop

    4.2 Assembly SOP Preparation before assemble 1. Clean the room for work 2. Identify the area for material 3. Prepare the implement, equipment, material as bellow: 1) Working table 2) Philips-head screwdriver 3) Glove 4) Cleaning cloth 5) ESD protection Item Picture Operation...
  • Page 14 1. Insert FFC LVDS into Panel Philips-head screwdriver Torsion of Main SHD screw: 6~7kgf 2. Place Main SHD on panel and lock 4 Main SHD screws 1. Insert CTRL FFC into I/F BD and arrange CTRL FFC 2. Insert backlight wire into SPS 3.
  • Page 15 1. Assemble Rear Cover with Mid-Frame 2. Follow the sequence to press on Rear Cover to make it be assembled with Mid-Frame tightly S2721DS: Philips-head 1. Lock 4 screws on Rear Cover screwdriver Torsion of RC screw: 8.5±1.0kgf S2721D: Philips-head 1.
  • Page 16 S2721D: S2721D: To assemble Stand and VESA screw cover with Monitor 1. Align and place the stand riser on the stand base 2. Open the screw handle at the bottom of the stand base and turn it clockwise to secure the stand assembly 3.

  • Page 17: Trouble Shooting Instructions

    5. Trouble shooting instructions - 17 -...
  • Page 18 - 18 -...
  • Page 19 - 19 -...
  • Page 20 - 20 -...
  • Page 21 - 21 -...
  • Page 22 - 22 -...
  • Page 23 - 23 -...

This manual is also suitable for:

S2721dsb

Table of Contents